DSH Marketplace

The catalogue

Notifications & Integrations

Synced from the community registry and the dsh-plugin GitHub topic. Star counts and last-push dates come straight from GitHub.

501 plugins

84% install-verified on DeepSeek Harness 0.2

dsh-im

xmanrui

2.4k

Connect IM bots to DeepSeek Harness via QR codes or bot credentials (9 channels: Feishu, WeChat, DingTalk, WeCom, QQ, Slack, Telegram, Discord, and WhatsApp).

Installed cleanly when we ran it

npm packageJavaScript24d ago

AI review

dsh-im

What it is — Attaches DeepSeek Harness to nine messengers—Feishu, WeChat, DingTalk, WeCom, QQ, Slack, Telegram, Discord, WhatsApp—signing in with a QR code or bot credentials.

Who it is for — A DeepSeek Harness agent is already running on a machine you left behind, and the missing piece is sending it a line from WeChat or Feishu on your phone. If that agent already sits behind your own web UI or internal gateway, this hop is not what you are short on.

Watch out — On a clean profile it installed and the harness registered it; no obvious pit showed up there. Live send and receive on those nine channels was not part of that run.

The verdict — I only add it after I am willing to let this plugin hold the IM login—getting into a profile is not the decision.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
Details

dsh-pocket

shaobeichen

2.3k

Remote phone access to the DSH Web UI: scan a QR code for LAN or public (cloudflared tunnel) access with real-time sync, a mobile-adaptive layout, and a settings tab.

Installed cleanly when we ran it

npm packageJavaScript1mo ago

AI review

dsh-pocket

What it is — Adds a phone-access page to the DSH Web UI: scan a LAN or public QR code and the desktop session streams to a mobile layout you can operate.

Who it is for — An agent is still running on the office machine after you have left, and you have no RDP or SSH—only a phone to read the stream, send a follow-up, or tap an approval. Skip it if you only drive DSH from the CLI; the entry lives in the web settings sidebar and never joins a terminal workflow.

Watch out — Sandbox: it installed on a fresh profile and harness registered it. Public mode downloads and shells out to cloudflared, and a disclaimer must be checked every time that path is turned on—classified or corporate nets need their own compliance pass. LAN autodetection can miss a reachable IP on Tailscale or VPN; the mobile file-browser entry hides when the host has no explorer panel; restarting dsh web drops the phone login.

The verdict — I'll add it when I am willing to let the live control surface, approvals included, ride a LAN or Cloudflare path; if that surface has to stay on the desk, it stays off.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Details

openpets

OpenPetsHQ

1.3k

Bridges DeepSeek Harness lifecycle status, errors, and approval requests to a locally running OpenPets desktop companion.

No one-line install — this plugin lives inside a larger repository and publishes no npm package.

GitHub sourceTypeScript26d ago

AI review

openpets

What it is — Pushes DeepSeek Harness run state, errors, and pending approvals onto an OpenPets pet already open on the local desktop.

Who it is for — You are shipping code with a DeepSeek Harness agent on your own machine, and run state, failures, and approval prompts only flicker inside the session, so you want a desktop pet to catch them. Skip it when DSH lives on a headless remote host; nothing on that box can receive the events.

Watch out — There is no one-command package; you have to attach it as a subdirectory plugin from the repository. It invokes the system shell at runtime.

The verdict — I would not treat it as an agent feature; it does not change how I approve work, only whether I catch the prompt in peripheral vision.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Source

Connects DeepSeek Harness to Avernet's Bot Collaboration Network over WebSocket V2, with automatic onboarding, isolated agent sessions, tool-call events, and multi-bot routing tools.

No one-line install — this plugin lives inside a larger repository and publishes no npm package.

GitHub sourcePython29d ago

AI review

deepseek-harness-channel-bcn

What it is — This plugin connects DeepSeek Harness to Avernet's Bot Collaboration Network.

Who it is for — When you need to run multi-agent collaboration tasks with DeepSeek Harness. If your work involves only independent agents without needing the Bot Collaboration Network, you can use other approaches.

Watch out — Sandbox testing has not been performed. Static check indicates it will execute shell commands. No obvious issues found.

The verdict — I would install it if I need Avernet infrastructure integration, because it supports WebSocket V2 connection.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Source

dsh-qqbot

zaofan-make

225

QQ official bot channel (enhanced fork of tencent-connect/dsh-qqbot): full agent chat in groups and DMs, rich media, an auto-tagged sticker library with AI image replies, join approval, mute and broadcast, scheduled wakeups, remote approvals over QQ, interactive cards, multi-account instances, extensions, member profiles, and token-saving value-scored wakeups.

Installed cleanly when we ran it

npm packageTypeScript11d ago

dsh-deepcanary

Oscar-Williams

182

Evidence-first attention supervision for DeepSeek Harness with C0–C3 policy, deduplicated Inbox alerts, quiet hours, and redacted outcome records.

Installed cleanly when we ran it

npm packageTypeScript13d ago

dsh-qq-link

Yuuyuko-uu

150

Bridges a DSH session and QQ over NapCat HTTP, forwarding agent replies to QQ and feeding messages you send in QQ back into the session.

Installed cleanly when we ran it

npm packageJavaScript16d ago
89

Desktop notifications for turn completions, with per-outcome controls and keyword rules.

Installed cleanly when we ran it

GitHub sourceJavaScript2mo ago

dsh-notify-me

chromoany

73

Sends a system notification, a sound and a tab-title marker when an approval, plan review or question needs your answer, or a background reply finishes; the settings page controls toggles, volume and the notification language, and clicking a notification returns you to the session.

Installed cleanly when we ran it

npm packageJavaScript19d ago

plugin-notify

whyihaveyou

63

IM webhook and local notifications on turn completion, errors, or approval (Feishu/WeCom/DingTalk/Slack/Discord/custom).

No one-line install — this plugin lives inside a larger repository and publishes no npm package.

GitHub sourceHTML23d ago

AI review

plugin-notify

What it is — Sends notifications via IM webhooks and local systems when turns complete, errors occur, or approvals are pending.

Who it is for — When using DeepSeek Harness for turn completion, errors, or approval notifications, users needing instant results should install this plugin. If not involving external IM integration, users can skip this plugin.

Watch out — This is a subdirectory plugin with no single command install. Manual allowance of shell script execution is required from source builds. It executes shell commands and requires API key or token. No sandbox testing was conducted.

The verdict — I would install it because it handles notifications for turn completion and errors in agent workflows, but only if external IM integration is necessary.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
2Details
61

Connects WeChat, WeCom, DingTalk, Feishu, Lark, QQ, and Telegram to a local DeepSeek Harness agent, with each IM chat as a separate workspace channel.

Installed cleanly when we ran it

npm packageJavaScript1mo ago

AI review

dsh-im-connect

What it is — dsh-im-connect integrates WeChat WeCom DingTalk Feishu Lark QQ Telegram with local DeepSeek Harness agent, with each IM chat as a separate workspace channel.

Who it is for — It is suitable to install this plugin when driving the DeepSeek Harness agent in WeChat WeCom DingTalk Feishu Lark QQ Telegram chats and completing tool approval in the original conversation. If you do not involve private chat access and whitelist settings, you do not need to install this plugin.

Watch out — No obvious pit was found. The sandbox test showed it registers successfully in a new profile. After installation, you need to restart dsh web and hard refresh the browser to see the setting page.

The verdict — I would install it because it allows completing tool approval in the original IM conversation, which provides mobile interaction not available in the web interface.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Source

dsh-lark

omdsh-dev

57

Lark/Feishu bot channel for DeepSeek Harness: each chat drives its own agent, and tool approvals, model questions, and plan reviews return as cards answered by a button or a reply. Switch workspace and model from the chat (`/cd`, `/model`, `/new`), and run several bots that keep separate sessions and can hand turns to each other in one group.

Installed cleanly when we ran it

npm packageTypeScript3mo ago

AI review

dsh-lark

What it is — DeepSeek Harness Lark/Feishu plugin: integrates chats to drive agents with card-based approvals.

Who it is for — Users collaborating multiple DeepSeek Harness agents in one Lark/Feishu group chat benefit from independent sessions and turn handoff. Users who do not use Lark or Feishu as integration channels can skip this plugin because they lack the chat environment.

Watch out — No public server or callback configuration needed. Tested and registered successfully in a new profile. No obvious issues found.

The verdict — I would install it because no public server or callback configuration is required.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
Details

dsh-notifier

THEWOLFWALKER

56

DSH notification & remote-control plane: one `notify()` API across 28 outbound channels, six inbound control channels, phone approvals/questions/task control, a Native DSH Notify & Control UI, live outbound hot-apply, multi-agent routing, and zero runtime dependencies.

DeepSeek Harness 0.2.2-rc.1 refuses the latest release

npm packageJavaScript1mo ago

AI review

dsh-notifier

What it is — dsh-notifier plugin for DeepSeek Harness adds a single notify() API across 27 notification channels with event-driven pushes and phone approvals.

Who it is for — It suits users who run DeepSeek Harness agents that require multi-channel notifications and mobile approval workflows. Users without multi-channel or mobile interaction needs do not need it.

Watch out — Sandbox testing confirms it installs and registers successfully in a fresh profile. Zero runtime dependencies. No obvious issues found. It may execute shell commands, but this is a static check note, not a runtime defect.

The verdict — I would not install it because it requires manual approval for build scripts and its scope is limited to notification and control rather than core agent functionality.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Details

Open DSH workspace directories in VS Code directly from the web GUI.

npm packageJavaScript3mo ago

ACP profile plugin and standalone stdio server for using the full DSH agent from Zed and other ACP clients while sharing DSH credentials and sessions.

Installed cleanly when we ran it

npm packageTypeScript28d ago

AI review

deepseek-harness-acp

What it is — It is an ACP profile plugin and standalone server for DeepSeek Harness.

Who it is for — Users who want to use the DeepSeek Harness agent from Zed via the ACP protocol are suitable to install it. Users who do not use Zed or other ACP clients can manage credentials and sessions directly in the DeepSeek Harness web interface.

Watch out — After installation in a new profile, it is registered by the harness and executes shell commands. Sandbox testing passed with no obvious pitfalls found.

The verdict — I would not install it because it only serves as a bridge for specific client integrations without changing the core capabilities of the DeepSeek Harness agent.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Source

dsh-qqbot

gcry13067381632-jpg

42

QQ official bot channel for DeepSeek Harness (feature-rich fork of tencent-connect/dsh-qqbot): group and private chat with the full agent, sticker library with auto-tagging and AI meme replies, group management (join approval and mute), botplay interactive card events with paginated catalogs, user extension registry (custom slash commands and QQ tools), scheduled wakeups, remote approvals over QQ, and a floating dock web UI.

Installed cleanly when we ran it

GitHub sourceTypeScript1mo ago

dsh-lark-bot

PlutoKeating

41

Feishu/Lark bridge for DeepSeek Harness: scan-to-connect PersonalAgent binding, streaming cards, git-worktree project workspaces, parallel per-scope tasks, multi-role agents, cross-session notify, in-chat model/key management, and a safety-net guardian that still answers in Feishu after dsh crashes.

Installed cleanly when we ran it

npm packageTypeScript2mo ago

AI review

dsh-lark-bot

What it is — dsh-lark-bot bridges DeepSeek Harness into Feishu/Lark bot, enabling chat-based control of local coding agents with streaming cards, multi-role agents, workspaces, and safety net.

Who it is for — Developers who use Feishu/Lark for team collaboration in group chats or topics can install it. Those who run DeepSeek Harness exclusively via terminal do not need it, as they have no requirement for Feishu integration.

Watch out — The plugin executes shell commands. Sandbox testing confirmed successful registration in a new profile. No obvious issues found.

The verdict — I would install it because it provides safety-net guardian for crashed DSH instances, which is a relevant value in Feishu workflows.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Source
40

High-reliability Feishu/Lark bridge for DeepSeek Harness: QR one-click auth, card-based commands and intent-confirmation cards, at-least-once zero-loss outbox, media in/out, /doctor session-log ZIP, and a reusable DSH Web GUI that lands sessions in the right workspace.

Installed cleanly when we ran it

npm packageTypeScript1mo ago

AI review

dsh-lark-link

What it is — dsh-lark-link is a Feishu/Lark bridge plugin for DeepSeek Harness. It supports QR one-click auth, card-based commands, intent-confirmation cards, zero-loss messaging, and media in/out.

Who it is for — If you need to communicate with your DeepSeek Harness agent in Feishu group chats and manage tasks on mobile without staying at the terminal, this plugin fits your needs. Users who operate solely within the terminal and do not require media input/output or group chat integration do not need to install it.

Watch out — It requires an API key or token to be provided. Sandbox testing confirmed it registers successfully in a new profile. It will execute shell commands. No obvious issues were found.

The verdict — I would install it because it enables the agent to land sessions in the correct workspace via a reusable DSH Web GUI. This is useful if workspace management is important.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
2Source

Native-style notification sounds for DeepSeek Harness: a chime when the agent needs your decision or finishes a task, clickable system notifications that jump back to the window, repeat reminders, quiet hours, and goal-mode alerts that wait for the final round.

Installed cleanly when we ran it

npm packageJavaScript10d ago
37

Feishu (Lark) UI for DeepSeek Harness — a panel-driven control console: every slash command is a button on the ⚙️ control-panel card, in-card approvals and questions, live streaming cards, and one-QR app setup.

DeepSeek Harness 0.2.2-rc.1 refuses the latest release

npm packageTypeScript17d ago

AI review

dsh-feishu

What it is — This plugin provides a Feishu interface control console for DeepSeek Harness.

Who it is for — Users who need to access commands and handle approvals via panel in Feishu chats with DeepSeek Harness agents are suitable to install this plugin. If you primarily use DeepSeek Harness in terminal or web environments, you do not need to install this plugin.

Watch out — Sandbox test passed: it was installed in a new profile and registered with Harness. No obvious issues found.

The verdict — I would install it because it maps commands directly to buttons on the Feishu panel.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
Source

Desktop notification reminders.

Installed cleanly when we ran it

GitHub sourceTypeScript1mo ago

dsh-notifier

wingsky-1

32

Task-event notification center: 6 event kinds (ask / approval / completion / subagent completion / error / turn end), dual channels (browser Notification + host system toast) plus Bark/Webhook push channels (ntfy, Gotify, self-hosted gateways); quiet hours with urgent exceptions, approval-timeout re-reminders, completion-storm aggregation, and notification text redaction.

Installed cleanly when we ran it

npm packageTypeScript11d ago

AI review

dsh-notifier

What it is — Task-event notification center supporting browser notifications and push channels for 6 event types.

Who it is for — For users handling subagent completion and turn-end task events requiring notifications, this plugin is suitable for installation. Users running alpha versions of DeepSeek Harness do not need to install it.

Watch out — No obvious issues found. Real testing passed with successful installation in fresh profile and registration into Harness.

The verdict — I would install it because it supports notification text redaction.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
Source

Notifications for four session states, with browser alerts and prompts.

Installed cleanly when we ran it

npm packageTypeScript1mo ago

AI review

dsh-session-notification

What it is — dsh-session-notification adds a Notifications section to the DeepSeek Harness settings panel. It sends browser alerts and plays sounds for four session states: completed, failed, question asked, and permission requested.

Who it is for — If you use DeepSeek Harness web GUI for multi-turn conversations and want notifications when sessions finish or prompt you without staying on the page, this plugin is suitable. People who do not use DeepSeek Harness web GUI or do not need session status alerts do not need to install it, because the feature relies on browser notification and sound capabilities.

Watch out — It passed sandbox testing in a clean profile. Shell command execution is flagged in static checks. Browser notifications are off by default and require user gesture permission. No other obvious issues found.

The verdict — I would not install it because it only adds browser-side features without core functionality changes, but if you run long sessions in the web GUI and need passive updates, it could be worth it.

Generated by grok-4.6, and a starting point rather than a verdict. Where it says a plugin installs or does not, that is from a real run in a clean profile — everything else is read off the repository. Trust the source over this.Read the source
1Source

gateway-core

temotee2103

23

DSH-side remote session driver for the dsh-overdrive chat gateway: exposes sessions, trajectory replay and tap-to-approve to Telegram / Discord / Slack / WhatsApp / Feishu / DingTalk / WeCom bridges. Requires running @dsh-overdrive/gateway alongside.

No one-line install — this plugin lives inside a larger repository and publishes no npm package.

GitHub sourceTypeScript2mo ago